LNB Invacom SNH-031 |
LNB Invacom SNF-031 |
| 1. Input Frequency: |
| Low Band: |
10.7 - 11.7 GHz |
| High Band: |
11.7 - 12.75 GHz |
| 2. Output Frequency: |
| Low Band: |
950 - 2150 MHz |
| High Band: |
950 - 2150 MHz |
| 3. Noise Figure: |
0.3 dB typ |
| 4. Gain: |
50 - 60 dB |
| 5. Gain Ripple : |
| 26 MHz bandwidth: |
< ±0.5dB |
| Low Band: |
< 5dB typ |
| High Band: |
< 5dB typ |
| 6. Local Oscilator Frequency: |
| Low: |
9.75 GHz |
| High: |
10.6 GHz |
| 7. Local Oscilator Phase Noise (typ): |
| 1 kHz: |
-65 dBc/Hz |
| 10 kHz: |
-95 dBc/Hz |
| 100 kHz: |
-110 dBc/Hz |
| 8. Local Oscilator Stability: |
| (including Setting, aging and |
±1 MHz typ |
| temperature drift) |
±3 MHz max |
| 9. Current Consumption |
105mA |
| 10. Image Rejection |
>40 dB |
| 11. Isolation: |
| Cross Polar Isolation |
>25 dB |
| 12. Two Tone 3rd Order intercept point (output) |
>15dBm |
| 13. Output Connector |
female F-Type |
| Impedance |
75 Ohm |
| Return Loss |
>10 dB |
| 14. Operating Temperature Range |
-40°C to +70°C |
| Storage Temp Range |
-40°C to +70°C |
| 15. Band Polarization Selection |
| Signals applied to F-type connector |
| Vertical Polarization Selection |
11.5V to 14V |
| Horizontal Polarization Selection |
15.5V to 19V |
| High Band Selection (22kHz tone) |
| Frequency |
18 kHz to 26 kHz |
| Level |
0.4 Vpp to 0.8 Vpp |
| Transition time |
5µS to 15µs |
| Duty Cycle |
40% to 60% |
| Load Impedance at 22kHz |
>70 Ohm |
| low Band Selection |
No tone |
| 16. SNF-031 Interface |
18.5mm Ø Waveguide, C120 Flange |
| SNH-031 |
Off-set Parabola Matched,
Frequency Compensated Feed Horn,
40mm Dish Clamp. |
LNB Invacom TWH-031 |
LNB Invacom TWF-031 |
| 1. Input Frequency: |
| Low Band: |
10.7 - 11.7 GHz |
| High Band: |
11.7 - 12.75 GHz |
| 2. Output Frequency: |
| Low Band: |
950 - 2150 MHz |
| High Band: |
950 - 2150 MHz |
| 3. Noise Figure: |
0.3 dB typ |
| 4. Gain: |
50 - 60 dB |
| 5. Gain Ripple : |
| 26 MHz bandwidth: |
< ±0.5dB |
| Low Band: |
< 5dB typ |
| High Band: |
< 5dB typ |
| 6. Local Oscilator Frequency: |
| Low: |
9.75 GHz |
| High: |
10.6 GHz |
| 7. Local Oscilator Phase Noise (typ): |
| 1 kHz: |
-65 dBc/Hz |
| 10 kHz: |
-95 dBc/Hz |
| 100 kHz: |
-110 dBc/Hz |
| 8. Local Oscilator Stability: |
| (including Setting, aging and |
±1 MHz typ |
| temperature drift) |
±3 MHz max |
| 9. Current Consumption |
port 1 only 170mA typ
both ports 200mA typ |
| 10. Image Rejection |
>40 dB |
| 11. Isolation: |
| Cross Polar Isolation |
>30 dB |
| High to Low Band Isolation |
>30 dB |
| 12. Two Tone 3rd Order intercept point (output) |
>15dBm |
| 13. Output Connector |
2 x female F-Type |
| Impedance |
75 Ohm |
| Return Loss |
>10 dB |
| 14. Operating Temperature Range |
-40°C to +70°C |
| Storage Temp Range |
-40°C to +70°C |
| 15. Band Polarization Selection |
| Signals applied to F-type connector |
| Vertical Polarization Selection |
11.5V to 14V |
| Horizontal Polarization Selection |
15.5V to 19V |
| High Band Selection (22kHz tone) |
| Frequency |
18 kHz to 26 kHz |
| Level |
0.4 Vpp to 0.8 Vpp |
| Transition time |
5µS to 15µs |
| Duty Cycle |
40% to 60% |
| Load Impedance at 22kHz |
>70 Ohm |
| low Band Selection |
No tone |
| 16. In Band Spurious (primarily 1700 MHz) |
<-65 dBm |
| 17. Out to Band Spurious (primarily 850 MHz) |
<-45 dBm |
18. Output Gain Difference
(between the outputs in 26MHz Bandwidth) |
<6 dB |
| 19. TWF-031 Interface |
18.5mm Ø Waveguide, C120 Flange |
| TWH-031 |
Off-set Parabola Matched,
Frequency Compensated Feed Horn,
40mm Dish Clamp. |
LNB Invacom QTH-031 |
LNB Invacom QTF-031 |
| 1. Input Frequency: |
| Low Band: |
10.7 - 11.7 GHz |
| High Band: |
11.7 - 12.75 GHz |
| 2. Output Frequency: |
| Low Band: |
950 - 2150 MHz |
| High Band: |
950 - 2150 MHz |
| 3. Noise Figure: |
0.3 dB typ |
| 4. Gain: |
50 - 60 dB |
| 5. Gain Ripple : |
| 26 MHz bandwidth: |
< ±0.5dB |
| Low Band: |
< 5dB typ |
| High Band: |
< 5dB typ |
| 6. Local Oscilator Frequency: |
| Low: |
9.75 GHz |
| High: |
10.6 GHz |
| 7. Local Oscilator Phase Noise (typ): |
| 1 kHz: |
-65 dBc/Hz |
| 10 kHz: |
-95 dBc/Hz |
| 100 kHz: |
-110 dBc/Hz |
| 8. Local Oscilator Stability: |
| (including Setting, aging and |
±1 MHz typ |
| temperature drift) |
±3 MHz max |
| 9. Current Consumption |
185mA typ |
| 10. Image Rejection |
>40 dB |
| 11. Isolation: |
| Cross Polar Isolation |
>30 dB |
| High to Low Band Isolation |
>30 dB |
| 12. Two Tone 3rd Order intercept point (output) |
>15dBm |
| 13. Output Connector |
4 x female F-Type |
| Impedance |
75 Ohm |
| Return Loss |
>10 dB |
| 14. Operating Temperature Range |
-40°C to +70°C |
| Storage Temp Range |
-40°C to +70°C |
| 15. Power Supply |
8V to 19V |
| 16. In Band Spurious (primarily 1700 MHz) |
<-65 dBm |
| 17. Out to Band Spurious (primarily 850 MHz) |
<-45 dBm |
18. Output Gain Difference
(between the outputs in 26MHz Bandwidth) |
<6 dB |
| 19. Output configuration: |
| Horizontal High |
Output 1 |
| Horizontal Low |
Output 2 |
| Vertical High |
Output 3 |
| Vertical Low |
Output 4 |
| 20. QTF-031 Interface |
18.5mm Ø Waveguide, C120 Flange |
| QTH-031 |
Off-set Parabola Matched,
Frequency Compensated Feed Horn,
40mm Dish Clamp. |
Certificat de conformitate